Common Vision Blox Drivers

As you are probably aware, all GenICam compliant devices (served through GEV, U3V or a Transport Layer) are handled by the core package of :cvb: (CameraSuite / Image Manager) directly.

There are, however, a few devices that can be access through legacy drivers (*.vin) that may be installed on top of an existing :cvb: installation (the version of :cvb: is generally not important as these drivers use interfaces that usually remain stable across different releases of :cvb:, but it is important to make sure that the architecture of the driver matches the architecture of the :cvb: installation).

The following drivers are available:

Driver Version Platforms Devices/Comments
UVC RealSense TL 1.0.0 Win32, x64,
Ubuntu 18.04 x86_64, Ubuntu 18.04 aarch64
Intel(R) RealSense(R) devices
Note that unlike the other downloads here, this is actually a standard-compliant transport layer
Silicon Software microEnable 1.7.0 Win32, x64 Silicon Software microEnable III, IV and V
Datapath 3.0.2 Win32, x64 Datapath VisionRGB
Sapera Based 8.3.0 Win32, x64 Teledyne Dalsa XceleraCL LX1, XceleraCL PX4, XceleraCL PX8, Xtium, Xtium2

Note that for the Windows platform, typically only Windows 10 is actively supported.

1 Like