# CVB 13.04.005 issue: Genicam configuration: genicam.ini : 2nd camera section removed

**URL:** <https://forum.commonvisionblox.com/t/cvb-13-04-005-issue-genicam-configuration-genicam-ini-2nd-camera-section-removed/1713>\
**Category:** General Questions\
**Tags:** genicam\
**Created:** [June 17, 2022, 12:00pm UTC](https://forum.commonvisionblox.com/t/cvb-13-04-005-issue-genicam-configuration-genicam-ini-2nd-camera-section-removed/1713 "2022-06-17T12:00:21Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mikael](https://avatars.discourse-cdn.com/v4/letter/m/f04885/32.png) [@Mikael](https://forum.commonvisionblox.com/u/Mikael)\
**Post date:** [June 17, 2022, 12:00pm UTC](https://forum.commonvisionblox.com/t/cvb-13-04-005-issue-genicam-configuration-genicam-ini-2nd-camera-section-removed/1713/1 "2022-06-17T12:00:21Z")

</div>

Hello,  
With CVB 13.04.005.  
After CVB installation, using “CVB Management Console” to add 2 cams:

- 1st cam: Dalsa Linea gige
- 2nd cam: ATC5 2040 gige  
(I know this app becomes deprecated).

I opened CVB “Image View” and selected “genicam.vin”.  
Using grabber properties, I selected cam2.  
BIG BUG: Doing this selection, the cams was removed from genicam.ini.

I did the same configuration with “GenIcamBrower” app, and it worked fine.

Best regards,

---

<div class="post-metadata">

**Author:** ![c.hartmann](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.commonvisionblox.com/c.hartmann/32/247_2.png) [@c.hartmann](https://forum.commonvisionblox.com/u/c.hartmann)\
**Post date:** [June 20, 2022, 7:49am UTC](https://forum.commonvisionblox.com/t/cvb-13-04-005-issue-genicam-configuration-genicam-ini-2nd-camera-section-removed/1713/2 "2022-06-20T07:49:40Z")

</div>

Hi @Mikael  
CVB Management Console will be removed with CVB v14.0.X.  
(I.e. Soon).

So we will likely not invest time into this, if the Genicambrowser works for you.  
But this is a weird bug, since Image View and the Genicam.vin should not write the Genicam.ini with your use-case.

---

<div class="post-metadata">

**Author:** ![Mikael](https://avatars.discourse-cdn.com/v4/letter/m/f04885/32.png) [@Mikael](https://forum.commonvisionblox.com/u/Mikael)\
**Post date:** [June 20, 2022, 12:06pm UTC](https://forum.commonvisionblox.com/t/cvb-13-04-005-issue-genicam-configuration-genicam-ini-2nd-camera-section-removed/1713/3 "2022-06-20T12:06:36Z")

</div>

> So we will likely not invest time into this, if the Genicambrowser works for you.

Ok thanks, It was just for reporting the bug. I will need to inform my collegues to used Genicambrowser this 13.04.005 I am testing.

Best regards,  
Mikae.