# Activate TurboDrive

**URL:** <https://forum.commonvisionblox.com/t/activate-turbodrive/411>\
**Category:** .Net API\
**Created:** [March 29, 2018, 4:07pm UTC](https://forum.commonvisionblox.com/t/activate-turbodrive/411 "2018-03-29T16:07:03Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tomes](https://avatars.discourse-cdn.com/v4/letter/t/c4cdca/32.png) [@Tomes](https://forum.commonvisionblox.com/u/Tomes)\
**Post date:** [March 29, 2018, 4:07pm UTC](https://forum.commonvisionblox.com/t/activate-turbodrive/411/1 "2018-03-29T16:07:03Z")

</div>

Hi all,

Small question this time. I’m activating TurboDrive the same way as described [here](https://forum.commonvisionblox.com/t/raw-color-format-in-device-discovery/253/2) (parameter “UseTurboDrive”). After activation, how can I increase the framerate beyond their ‘normal’ limits?  
I’m using a Teledyne Dalsa Genie Nano C1280 for this.

---

<div class="post-metadata">

**Author:** ![dusalf](https://avatars.discourse-cdn.com/v4/letter/d/e9c0ed/32.png) [@dusalf](https://forum.commonvisionblox.com/u/dusalf)\
**Post date:** [April 3, 2018, 6:43am UTC](https://forum.commonvisionblox.com/t/activate-turbodrive/411/2 "2018-04-03T06:43:04Z")

</div>

Hi Thomes,

just use the normal Std::AcquisitionFrameRate genicam feature. You will not see a change in the limits of that feature. Only the network traffik is reduced. The limits depend on the sensor speed and resolution, not on the use of TD.

Regards

---

<div class="post-metadata">

**Author:** ![Tomes](https://avatars.discourse-cdn.com/v4/letter/t/c4cdca/32.png) [@Tomes](https://forum.commonvisionblox.com/u/Tomes)\
**Post date:** [April 3, 2018, 11:58am UTC](https://forum.commonvisionblox.com/t/activate-turbodrive/411/3 "2018-04-03T11:58:15Z")

</div>

Thanks @dusalf. That’s all I needed to know.